过温度50度，纯净水用DN250可曲挠橡胶接头

The temperature of Liaoning is 50 degrees. Pure water is made of DN250 rubber joint.

淞江集团为辽宁50度管道过水配套DN250可曲挠橡胶接头产品，厂家为全国各地客户提供各种型号口径耐油，耐高温，耐腐蚀，耐磨橡胶接头，以下是给辽宁温度50度，纯净水用的DN250可曲挠橡胶接头产品介绍。

Songjiang Group provides DN250 rubber joint products for Liaoning 50 degree pipeline through water. The manufacturer provides customers all over the country with various types of oil-resistant, high temperature-resistant, corrosion-resistant and wear-resistant rubber joint. The following is the introduction of DN250 rubber joint products for Liaoning 50 degree temperature and pure water.

新客户（微信：辽宁通诺华）

客户要求：可曲挠橡胶接头 JGDH41-16C-DN80/DN250/DN125  款已付合同已签，能尽快给我发货吗？

淞江集团技术部门30年生产经验为您介绍，可曲挠橡胶接头安装前需要注意？

1、须根据管线的工作压力、链接方式、介质和补偿量来选择合适的可曲挠橡胶接头型号，数量的话要根据降噪位移的要求来选择。

2、挠橡胶接头使用在水泵进出口时，应位于近水泵一侧，与水泵之间应安装金属变径接头，且安装在变径的大口径处。

3、安装可曲挠橡胶接头时，螺栓的螺杆应伸向接头外侧，每一法兰端面的螺栓按对角加压的方法反复均匀拧紧， 防止压偏。丝口接头应使用标准扳手匀力拧紧，不要用加力杆加力使活接头滑丝、滑棱和断裂，而且要定期检查，以免松动造成脱盘或渗水。

Above is the flexible rubber joint for Yantai water supply equipment. The product caliber is DN50. Our factory has a wide range of sales areas. Welcome customers from all over the world to visit our factory on the spot. Address: Turn left at No. 699 Caosheng Road, Jiading District, Shanghai