辽宁走温度50度，纯净水用DN250，DN125可曲挠橡胶接头

    辽宁走温度50度，纯净水用DN250，DN125可曲挠橡胶接头

    The temperature of Liaoning is 50 degrees. Pure water can be flexed by DN250 and DN125.

    淞江集团为辽宁***华有限公司配套走温度50度，纯净水用的DN250，DN125可曲挠橡胶接头，产品具有良好的耐介质性能。淞江集团为全国客户提供各种型号口径耐油，耐腐蚀，耐磨橡胶接头，以下是给走50度纯净水管路配套的DN250可曲挠橡胶接头产品介绍。

    Songjiang Group is a complete set of DN250 and DN125 flexible rubber joints for Liaoning *** Hua Co., Ltd. with a temperature of 50 degrees and pure water. The products have good dielectric resistance. Songjiang Group provides various types of oil-resistant, corrosion-resistant and wear-resistant rubber joints for customers all over the country. The following is an introduction of DN250 flexible rubber joints for 50 degree pure water pipeline.

    新客户：（微信：顾先生，污水处理项目负责人）

    客户要求：可曲挠橡胶接头 KXT型DN80/DN250/DN125

    合作单位：辽宁**华设备有限公司

    淞江集团30年生产技术经验为您介绍，可曲挠橡胶接头安装在管道什么位置最佳？

    1.橡胶弯头在安装时，严禁超位移极限安装。

    2.安装螺栓要对称，逐步加压扭紧，以防局部泄漏。

    3.1.6MPa以上的工作压力，安装螺栓要有弹性压垫，以防工作时螺栓松动。

    4.垂直安装时接头管道两端应有垂向受力支承，可采取防拉脱装置，以防止工作受压拉脱。

    5.橡胶弯头安装部位应远离热源.臭氧区域.严禁强辐射光线暴晒和使用不符合本产品要求的介质.

    6.橡胶弯头在运输装卸时严禁锐利器具划破表面、密封面。

    以上是我厂家为辽宁走温度50度，纯净水管路配套的DN250，DN125可曲挠橡胶接头，产品质量好，销量高，一直是我们的主推产品和推荐产品，面对于国内外销售市场，货源一直供应不求。相关产品（橡胶挠性接头）欢迎进厂参观考察我，我们的地址：上海市嘉定区曹胜路699号，进厂左转。

    Above is the DN250 and DN125 flexible rubber joints for Liaoning with 50 degrees of temperature and pure water pipeline. The product quality is good and the sales volume is high. It has always been our main product and recommended product. In the face of domestic and foreign sales market, the supply of goods has been in short supply. Relevant products (rubber flexible joints) Welcome to visit me. Our address is 699 Caosheng Road, Jiading District, Shanghai. Turn left when you enter the factory.

上一篇：普通的水用的橡胶接头DN40-DN125，304法兰  下一篇：泰州污水处理厂订购DN500橡胶接头2套